Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13594471
- Product Categories
- Friendly Links
Information Name: | 2015 days supply of oil shale crusher stand |
Published: | 2015-01-29 |
Validity: | 360 |
Specifications: | |
Quantity: | 100.00 |
Price Description: | |
Detailed Product Description: | With the increasing depletion of oil resources, oil shale development in various countries has become an important global future exploitation of oil development. Processing oil shale, oil shale will be first crushed, then heated to about 500 ℃, shale oil can be obtained in this process is the most important work crushed oil shale, oil shale crushed The finer the fuel is higher. Tianli mechanical look to the future, to develop a professional oil shale crusher according to market demand, the aircraft's crushing ratio, the expected size thin (2mm below 80%), is an excellent crushing equipment for processing oil shale. The machine has the following features: 1. There is no grate and screen, no blocking no card, low wear costs. Traditional grinder fitted bottom grate or screen at the end, the moisture content of the raw material requirements are more stringent when the moisture content of more than 8% easily blocked, even when serious burn out the motor, affecting production. And this mill for raw material moisture content is not stringent requirements, under normal circumstances, the moisture content can be normal production at 18% or less, to solve the congestion and repeated crushing invalid wear problems arise, the annual savings sieve bottom or grate cost tens of thousands to several hundred thousand dollars. 2. Long crushing stroke, the material thin, high yield, particle size machine with the management side of the discharge port in the body, greatly increasing the crushing stroke of the machine increased by 30% compared to conventional grinding mill district, and then to discharging fine high yield and high yield excellent results with the management of the particles, (3mm below 80% -90%, which accounted 0-0.5mm 40% -55%, 0.5-1.2mm accounted for 20%.. - 30%, 1.2-2mm accounting for 10% -20%, 2mm-3mm accounted for 10% -20%), in many industries can greatly reduce the workload of the subsequent wear and ball mill and other equipment, to achieve the desired results much less broken grinding. 3 The power of small, smooth operation, saving more than 20% of the center of the rotor portion of the device weight balance wheel, adjustable cyclical operation, making it smooth, increases inertia to overcome the resistance, saving up to 20%. 4 Hydraulic open and close the case, easy maintenance machine cover with hydraulically open and close, a person can operate, lightweight, fast, and easy maintenance. |
Admin>>>
You are the 6158 visitor
Copyright © GuangDong ICP No. 10089450, Gongyi City Tianli Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 6158 visitor
Copyright © GuangDong ICP No. 10089450, Gongyi City Tianli Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility